The Carpuride BS Series (including the W702BS, W602BS, and W502BS) is designed specifically for compatible BMW motorcycles. Built to work with BMW factory equipment, this series integrates with the original navigation prep and the handlebar controller to provide an intuitive smart screen experience.
🧩 Plug-and-Play with BMW Original Navigation Mount
The core highlight of the BS Series is its mechanical and electrical integration with BMW motorcycles:
• Direct Installation:
The screen mounts directly onto the BMW original navigation mount without requiring custom brackets.
• No Manual Wiring:
Power is drawn straight from the factory mount interface, eliminating the need to splice or run power cables to the battery.
🎮 Native BMW Wonder Wheel Control
The BS Series features Enhanced Multi-Controller Compatibility, allowing riders to operate the screen directly using the factory BMW Wonder Wheel on the left handlebar:
• Rotate: Scroll through interface menus and switch music tracks.
• Press: Confirm selections and open functions.
• Long Press: Switch between NAV mode and TFT mode.
• Real-Time Data Display: View key motorcycle operating data on the screen, including speed, engine RPM, mileage, and tire pressure.
🛡️ Safety & Sensor Features
🆘 SOS Emergency Mode:
If a collision is detected, the system initiates a 10-second countdown. If not manually canceled, it automatically dials your pre-set emergency contact.
🧭 Compass & Barometer:
Built-in compass and barometric altimeter sensors provide direction and elevation tracking.
☀️ Automatic Light Sensor:
Adjusts screen brightness based on ambient light conditions.
🌧️ IP67 Waterproof:
The unit is IP67-rated, dust-tight, and capable of withstanding water immersion up to 1 meter for 30 minutes.
🎧 Audio, Connectivity & TPMS
• Dual Bluetooth:
Connects to your smartphone for wireless Apple CarPlay / Android Auto while simultaneously transmitting audio to a Bluetooth helmet headset or intercom.
• OTA Updates:
Supports online Over-The-Air firmware updates directly over Wi-Fi.
• TPMS Support:
Displays tire pressure data from the motorcycle's factory-installed TPMS system.
📏 Model Differences: W502BS vs. W602BS vs. W702BS
While all three models share the same core software and BMW integration features, they differ in display size and power options:
• Screen Sizes:
W502BS features a 5-inch screen; W602BS features a 6-inch screen; W702BS features a 7-inch screen.
• Type-C Port (602BS & 702BS only):
In addition to the standard base mount power, the W602BS and W702BS include a Type-C input port. This allows users to power the unit using a power bank, which is convenient for tasks like calibrating the compass.
✅ Pre-Purchase Compatibility Checklist
Before purchasing a BS Series model, please verify the following:
1. BMW Motorcycle Model Compatibility:
Ensure your motorcycle is equipped with the BMW original navigation prep. For a detailed list of supported models and years, refer to our BMW Compatibility Guide.
2. Aftermarket TPMS Sensor Clearance:
If your BMW is not equipped with factory TPMS, a compatible TPMS kit is available separately on our website. Please measure the wheel clearance before ordering: the sensor has an outer diameter of 2.1 cm and a height of 1.6 cm, and it must clear the brake calipers and surrounding components during wheel rotation.
❓ Frequently Asked Questions (FAQ)
Q1: What should I do if my BMW motorcycle does not have the original factory navigation bracket?
A: The BS Series is designed specifically to lock into the BMW OEM navigation prep cradle. If your motorcycle does not have this factory navigation bracket installed, the BS Series will not fit.
Q2: Does installing the BS Series require wire cutting or modifying the motorcycle's electrical wiring?
A: No. On compatible BMW models with the original navigation bracket, standard installation is completely plug-and-play. The device draws power directly through the mount's contacts, requiring no wire splicing, cutting, or rerouting to the battery. Before installing, ensure you remove the protective film from the contacts on the back of the device. Once seated, confirm that the cradle latch is firmly locked into place before checking power and operation.
Q3: Does the BS Series require a smartphone connection to use navigation?
A: Yes. To use navigation via Apple CarPlay or Android Auto, a compatible smartphone must be connected. The BS Series acts as a display console for supported mobile navigation apps, including Apple Maps, Google Maps, and Waze.
Q4: How should I connect my Bluetooth helmet headset for the best audio experience?
A: The BS Series features a Dual Bluetooth system designed to prevent audio conflicts:
Solo Riding: Connect your smartphone to the Carpuride screen via Bluetooth/Wi-Fi, and then pair your helmet headset directly to the screen under the "Bluetooth Trans" menu. (Tip: Disconnect or forget the direct Bluetooth connection between your phone and your helmet to prevent signal interference.)
Riding with a Passenger: The rider’s helmet should be paired to BT1 (supporting calls, navigation prompts, and music), while the passenger’s headset connects to BT2 for shared music audio.
Q5: Is the BS Series compatible with all Bluetooth helmets and intercoms?
A: While the BS Series supports standard Bluetooth audio protocols, universal compatibility with every helmet or headset on the market cannot be guaranteed. Certain intercom systems that rely on closed or proprietary Bluetooth protocols may not function as intended. If you already use an intercom system and want to maintain your current connection setup, we recommend contacting our customer support with your exact brand and model before ordering.
⚠️ Important Notice Regarding Hardware & Upgrades:
Different Carpuride product models feature distinct internal hardware designs. Functions specific to a particular series (such as BMW Wonder Wheel integration or specific hardware ports) cannot be added to other models through accessory purchases or software updates. Please select the model that matches your motorcycle specifications before ordering.
